Windows is one of the Best and most widely used operating systems for computers around the world! DPC Watchdog Violation Error is usually encountered by Windows 10, Windows 8.1 and Windows 8 users. If you are facing this error, then you are not alone! Many people are reporting the same DPC watchdog violation in their Windows PC.
What is the DPC Watchdog Violation Error?
The error displayed on the screen is a PC DPC_Watchdog_Violation screen and is specially handled by Windows operating system users. This error occurs because of various factors such as unsupported SSD firmware, older SSD driver models, hardware incompatibility issues or system files being damaged. The most frustrating thing about this error is that whenever you see this error, your computer is restarted within a few seconds. Thus, you can not escape this error and you have to solve it as soon as possible.
So, here we are with some of the most useful ways you can use to fix the DPC watchdog violet error on your Windows PC.
How to fix DPC Watchdog violation error? 2019
Method # 1: Check if your hard-disk is corrupted
Since a defective hard disk can cause this error on your computer, you have to see if it is corrupted. The steps to check your hard-disk are listed below.
Step 1- Open Step Run Step by pressing Ctrl and simultaneously R on your keyboard simultaneously. Then, type ‘cmd’.
Step 2- Right-click at the command prompt and select ‘Run as administrator’ from the drop-down box.
Step 3- Now, enter the command: chkdsk c: / f / r. And then, hit Enter.
Step 4- Next time you start your computer, you will be asked to allow the check. To accept it, type on Y on your keyboard.
Step 5- Now, restart your computer so that your hard-disk can be checked for any kind of abnormality in it!
If possible, it will be automatically fixed and your problem will be resolved. However, if you face the same issue, then try to execute the next method.
Method # 2: Update your chipset driver.
Update your chipset Driver Follow the below-given steps
Step 1- Launch your Device Manager Search for Option IDE Ata / ATAPI Controllers. Once found, expand it by clicking Extension Options.
Step 2- Right-click on the controller named SATA ACHI and select Properties.
Step 3- Once you select a suitable controller, go to the drivers’ tab, then go to the driver details.
Step 4- In the Listing There is a iaStorA.sys. Then, click OK to exit.
Step 5- Go back to the ‘Properties’ window, then select the’ Update Driver which option you have. Drivers’ tab.
Step 6- Select to browse Computer My Computer for driver software and then, let me choose from the list of devices on my computer. ‘
Step 7- Select from the list 7- Standard SATA AHCI controller, and then click ‘Next’ to continue and finish the process.
Step 8- Now, restart your computer and DPC watchdog violation error should be resolved by now.
Method # 3: Fast Startup on your computer should be removed
If none of the above methods solves the error, try closing fast startup. There are many steps in the process
Step 1- Click on ‘Start> Options >> Control Panel >> Power Options.
Step 2- On the left side of the panel, choose what the power button does. ‘
Step 3- Now, the settings which are unavailable should be changed.
Step 4- Scroll down to scroll Startup Start fast startup Find and uncheck this option. And finally, save the changes by clicking on the ‘Save changes option’ below.
Now your error is fix. Restart your PC
These were some of the best methods that you can use to fix the DPC watchdog variant error on your Windows PC 2019. We have tried and tested all the methods listed above. Also, we have described each method in detail. Thus, you will not need any additional instructions to fix this error using the methods listed above.
However, if you know any better way to fix the DPC Watchdog violation error on your Windows PC, please tell us about it in the comments section below.